Biffens MC

/ Crosstillbehör / Oljor & Smörjmedel / ProGreen Bike Wash \1 L

ProGreen Bike Wash \1 L

Rinse excess dirt off bike.
Product is ready to use. Simply attach trigger and spray away!
Apply Pro-GreenMX Bike Wash, leaving to soak for 15-20 minutes (5 minutes if in a rush). The longer soak time, the better the results as it is non-aggressive!
Agitate with a brush or sponge if required for stubborn dirt.
Rinse off.
For best results use Pro-GreenMX After-Shine following.
For kits: add at least 500ml of product into a bucket of warm water and submerge your kit inside.
You can also throw in your goggles and straps before leaving to soak overnight.
The following morning, remove your goggles and straps and rinse under a tap until all chemical excess has been removed then leave to air dry.
With trousers, place these on the floor and agitate the bottom area with a sweeping brush to loosen excess dirt before placing directly into your washing machine, alongside kit top.
Wash your kit at 30 degrees on a normal wash or sports wash.
At the end of the wash cycle your kit will be the cleanest you have seen it since the day you purchased it!
For boots and helmets: simply spray product all over and leave to soak for 15 minutes before agitating with a brush/sponge if required. Rinse off!